Home › Retaining walls

Retaining walls in Christchurch and the Port Hills

We build timber pole, gabion and reinforced concrete retaining walls across Christchurch, the Port Hills and Banks Peninsula, and do the excavation and drainage ourselves. Walls over 1.5 m, or holding up a driveway, building or slope, need a building consent; we work with engineers to design them and handle the consent.

Retaining wall types we build

Wall typeBest forTypical heightNotes
Timber pole wallHouse sites, driveways, gardens, subdivision boundariesUp to about 3 m, engineered above 1.5 mTreated poles concreted or driven into the ground, with timber lagging. Cost-effective and quick to build.
Gabion basket wallHill cuttings, erosion control, entrance features, stream banksUp to about 3 m as a gravity wallWire baskets filled with rock. Free-draining, so water pressure doesn't build up behind them.
Reinforced concreteHigh walls, heavy loads, walls next to buildings or roadsEngineered to suitLongest life and lowest maintenance. Highest upfront cost and needs engineering.

Heights are a guide. Your engineer sets the design for any wall over 1.5 m or holding up a load.

Drainage: why walls fail

Most failed retaining walls we're called to have one thing in common: water. When it can't get out from behind a wall, it adds pressure the wall wasn't built for, and on the Port Hills it turns loess soil soft. Every wall we build has free-draining backfill (scoria or drainage metal), a slotted drain coil at the base taken to a safe outlet, and filter cloth where the soil is fine.

Under Schedule 1 of the Building Act 2004, some retaining walls don't need a building consent. All walls must still meet the Building Code.

Your wallBuilding consent?
Retains 1.5 m or less, and holds up nothing but the ground behind itUsually not needed (exemption 20)
Retains 1.5 m or less, but has a driveway, parking, building or sloping ground above (a "surcharge")Needed
Retains more than 1.5 mNeeded
Rural zone, retains up to 3 m, designed or reviewed by a chartered professional engineer, set back from boundaries and buildingsMay be exempt (exemption 41)

Source: building.govt.nz, Schedule 1 guidance. District plan earthworks rules can also apply. We confirm what your wall needs at the site visit.

Engineering and consent, handled

For walls that need it, we work with geotechnical and structural engineers on the ground investigation and design, prepare the consent paperwork with them, and build to the approved drawings so the engineer can sign off.

Retaining walls in photos

Common questions

How long does a timber retaining wall last?
A well-built treated pine pole wall with good drainage typically lasts 20 years or more. Drainage is the biggest factor: walls with water trapped behind them rot and lean far sooner.
What is the best retaining wall for the Port Hills?
It depends on height, load and access. Timber pole walls suit most house sites and driveways. Gabion walls drain freely and suit cuttings and erosion-prone banks. Concrete suits high or heavily loaded walls. Whatever the type, drainage behind the wall matters most on loess soils.
Do I need an engineer for my retaining wall?
Any wall needing a building consent needs a design, and that usually means an engineer. That covers walls over 1.5 m and walls with a driveway, building or slope above. We work with engineers we know and can organise it for you.
Can you fix or replace a failing retaining wall?
Yes. We assess why it failed, usually drainage, foundation depth or overloading, then repair, rebuild or build a new wall in front, with an engineer where needed.
How much does a retaining wall cost?
Price is driven by height, length, wall type, access, ground conditions, drainage, and engineering and consent fees. We give a fixed price after a free site visit. See /costs for what moves the price.

Get a fixed price after a free site visit

We walk the site, talk through options and send a written, fixed-price quote.